Custom Wool Blend Snapback Otto Cap


  • Burgundy Maroon
  • Charcoal gray
  • Charcoal gray / Black
  • Gray
  • Gray / Black
  • Grey / Navy blue
  • Kelly Green
  • Navy Blue / Grey
  • Red / Black
  • Black / Aqua
  • Black / Gray
  • Black / Orange
  • Black / Gold
  • Black / Purple
  • White / Black
  • Black / Red
  • Navy / Red
  • Black
  • Navy
  • White
  • Red

View * 

Embroidery type * 

3D puff isn`t available for side and back logos.

Design Service * 

This service for you if your design not ready for embroidery and you don’t have time to make your design ready, just send to us image for your favorite hat and make sure that will work with our embroidery guideline we mention before.

Gift Message

US & EU Product

Worldwide Shipping

PayPal Acceptance Mark
Share on facebook
Share on twitter
Share on pinterest
Share on whatsapp

Product Description

This is the snapback of your dreams! It’s structured and high-profile, with a flat visor and a subtle grey under visor.

• 85% acrylic/15% wool
• Structured, 6-panel, high-profile
• Plastic snap closure
• Grey under visor
• Head circumference: 22” – 24”

Additional Information


, , , , , , , , , , , , , , , , , , , ,

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.




Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Quality Guaranteed

When you shop with us be sure you will get best quality.

All Products made in USA & Europe
DTG Printing Printer

We use best equipment

Sewing Process

With best Workers

Every stage is important to us

Custom Hats (How to use)

  • Do Not use low quality image that may cancel your order.
  • Do Not Add a blank item without design or text to the cart because we don’t sell a blank products.
  • Do Not use any designs or text that have any copyrights.
  • Do Not use any Trademark designs or text.

Please take some time and read more information about Terms of Use.

Embroidery File Size For Hats

Please make sure you use our templates for the best results.


Embroidery file size

Embroidery file template


5.5'' x 2''

Side & back logo

2''x 1''

Embroidery types

Flat embroidery

  • Flat embroidery is a technique where stitches are embroidered flat on the hat. It’s used mostly for small details.
  • Minimum thickness for shapes: 0.05” (1.3 mm).
  • Maximum thickness for shapes: 0.5” (12.5 mm).
  • Minimum height for lowercase letters: 0.25” (6.4 mm).
  • Minimum height for uppercase letters: 0.3” (7.6 mm).
  • Any text smaller than 0.25” (6.4 mm) in height will be a run stitch.

3D puff embroidery

  • 3D puff is a technique where embroidery is raised with a foam insert under the stitching. It’s used mostly for big shapes.
  • Minimum thickness for shapes: 0.2” (5.1 mm).
  • Maximum thickness for shapes: 0.5” (12.5 mm).
  • Minimum height for letters: 0.75” (19.05 mm).
  • 3D puff isn`t available for side and back logos.

Available thread colors

Max of 2 colors for 3D puff, 4 for flat embroidery. Your embroidery file should only contain these colors.







Old Gold




















Kelly Green


Kiwi Green


Must-follow guidelines

1.Use true-to-size graphics

Graphics must be true to size. For example, if you’re using a high template file on a low profile hat or a side logo, details may not match requirements for that specific profile and the file should be adjusted.

2.Use solid shapes and colors only

Don’t include photographic images, gradients, or blend effects.

3.Use transparent backgrounds

Graphics should include transparent backgrounds.

4.Submit PNG files

Raster graphics (PNG) can be used if the resolution is at least 300 dpi.

5.Stay within the maximum stitch count

The maximum stitch count for our embroidery graphics is 15,000. If the stitch count goes over our maximum, we’ll contact you to revise your artwork.

Tips for best results

  • Embroidery is not printing, so most graphics you use on other products will likely not be suitable for embroidery. 
  • Keep it simple: clean designs with bold lines and text work best for embroidery.
  • If your design is too complex (eg. contains gradients or intricate details like small text), we’ll need to contact you to revise your graphic.

The most common issues

1.Text too small, lines too thin

Avoid using very small letters because the embroidered text might not be legible. Keep the text at least 0.25” in height and at least 0.05” thick

The minimum recommended line thickness for the regular satin stitch is 0.05”. For thinner lines we’ll use run stitch (a single line of stitches). 



2.Distressed or textured graphics

With distressed or textured graphics many details might be lost during embroidery depending on the texture size. For these files, we’ll only be able to use flat embroidery, and extremely thin parts are likely to be run stitched.

3.Negative space objects

These are the empty spaces in the artwork – the hat fabric showing through the design (but don’t mix it up with transparent background, which is alright!). This can cause several problems. 

Avoid these issues by filling the negative spaces with another color.




We can only embroider solid shapes and colors. Gradients won’t work because we can’t transition from one color thread to another. 

You’ll have to convert gradients to a one color graphic, and split multiple color graphics with gradients into solid colors.

5.Solid backgrounds

Graphics that cover a large part of the embroidery area will likely exceed the maximum stitch count of 15,000. Remove all backgrounds from your files to make sure they don’t exceed this count. 

If you’d like to keep the background, we’ll have to reduce the size of the graphic by up to 50%.

6.Photographic images

It’s not possible to embroider photographic images as they are. Photographic images have to be recreated to include solid shapes and colors.

7.3D Puff

Use bold shapes and text. Graphics that don’t meet the minimum object thickness will not be possible to embroider in 3D puff. Some fonts like calligraphy simply won’t work for 3D puff.

8.Side embroidery

The area for side embroidery is smaller than in the front. Include up to 10 characters in your text to make sure that the final result looks great.

Embroidery disclaimers

  • If it’s physically possible to digitize your graphic, we’ll digitize it. If your design doesn’t meet our guidelines, we can’t guarantee desirable results.
  • We use a run stitch for fine details in flat embroidery.
  • The generated preview on the mockup is for visual reference only and will not always match the final result.
  • Due to the high elasticity of beanies and slouch beanies, designs might not be uniformly embroidered or justified

If you don’t have a time to make your design ready for embroidery our designer team can make it for you just send to us image for your favorite hat and make sure that will work with our embroidery guideline we mention before.

This service will cost you extra money (5.00$ per design).

This website uses cookies to ensure you get the best experience on our website. Learn more.

special offer

Get 10% OFF + Free Shipping